燒斷器/熔斷器(可調電壓)-壓克力樹脂【群廣科技有限公司】

Chun Kuang Technology Co., Ltd

燒斷器/熔斷器(可調電壓)

燒斷器/熔斷器(可調電壓)

PCB修補設備與耗材

燒斷器/熔斷器(可調電壓)

NO:CF-200D

微短路熔斷機用熔斷方法消除印刷電路板在生產過程中出現的銅絲短路缺陷。
此種缺陷(常稱為微短路(Micro-short))只能用開短路(Open short)測試查出,不易用目檢察覺及排除。
具有兩項功能:1.短路確認
       2.用脈沖電流熔斷微短路 
       3.低脈衝輸出穩定,可確保電路不損。
特點:<1>高低脈沖輸出分別為兩個獨立腳踏開關觸發。
           <2>脈衝輸出容量無斷調節
           <3>低脈衝輸出穩定,可確保電路不損
           <4>絕緣測量用LED及鳴笛聲分三段顯示,最高可測15Meg Ohm
           <5>採用40A高容量繼電器,可靠耐用。
  • ● 配件:兩組腳踏開關、一組探針

2020© Copyright All Rights Reserved

Acrylic resin seeks innovation and diversified development, and achieves our vision of sustainable operation. Metallographic slice grinder, acrylic resin experiment is necessary, and it is recommended by the electronics industry. Acrylic resin, high-temperature non-residual adhesive triangle label stickers for maintenance, silicon carbide water sandpaper, polishing flannel, polymeric copper glue that can be directly soldered, silver glue, department consumables, etc.
KEEP GOING NEVER STOP